Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 189)

AlliedView™-EMS 4.0.3 Device Management Guide Page 189 of 468
Agent Menu
From the Agent menu, you can view and edit the system information for the switch, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Firmware Info
Displays a list of software releases installed on the switch.
Power Supply Info
Displays information about the power supply, redundant power supply and power
supply monitoring.
File List
Displays a list of the files in the switch's file system.
Config File Name
Displays the file name of the start-up configuration file.
Chassis Temperature Info
Displays the actual temperature of the switch and the temperature status.
Reset Cold
Resets the hardware and executes the default configuration file.
Reset Warm
Performs a warm start of the software modules and executes the default
configuration file.
Telnet
Starts a Telnet connection to the switch.
WEB browser
Opens your web browser and connects to the switch's HTTP server.
Note - The web browser can only contact the device if the device has a valid
resource file loaded and set, and the HTTP server and GUI on the device are
enabled.