Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 322)

AlliedView™-EMS 4.0.3 Device Management Guide Page 322 of 468
Note - Device Manager does not handle objects of type OCTET STRING
correctly. As a result, the Data Fill parameter will display a sequence of bytes
in hexadecimal format instead of the actual input value.
Note - The current firmware version does not allow Type parameter to be
configured.
Note - Device Manager does not handle objects of type BITS correctly.
As a result, the Trap Generation parameter will not be configurable and
will display an 8-bit binary string instead of the actual trap generation options
allowed.
Note - Device Manager does not handle objects of type OCTET STRING
correctly. As a result, the Target Address and Source Address parameter
will display a sequence of bytes in hexadecimal format instead of the actual
input value.
Ping Results
Displays the results of the performed ping operations in the Ping Control table.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Target IP Address parameter will display a sequence of bytes
in hexadecimal format instead of the actual IP address of the remote host.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Last Good Probe parameter will display a sequence of bytes in
hexadecimal format instead of the actual date and time of day.
Note - The current firmware version returns the value '???(3)' for the Operational
Status parameter when the Admin Status parameter in the Ping Control table is set
to enabled.
Note - The current firmware version is unable to display any value for the Owner
Index and Test Name parameters.
Ping Probe History Table
Displays ping probe history in performing ping operations.
Note - The current firmware version returns a 'noSuchName' value for the Ping
Probe History Table parameters.
Restart Device
Initiates a restart on the switch.
Telnet
Starts a Telnet connection to the switch.