Yaskawa MotionWorks IEC Toolboxes - Manual (Page 591)

Toolboxes Function Block ErrorID List
MotionWorks IEC61131-3 Toolboxes: 2013-09-13 578
12322 No data could be read from file
12421
Service not available, closing control connection. This may be a reply to any command if the
service knows it must shut down.
12425 Can't open data connection.
12426 Connection closed; transfer aborted.
12430 Invalid username or password
12434 Requested host unavailable
12450 Requested file action not taken / Requested mail action not take (mailbox unavailable)
12451 Requested action aborted. Local error in processing
12452 Requested action not taken, insufficient storage space in system (FTP: File unavailable)
12500 Syntax error, command unrecognised
12501 Syntax error in parameters or arguments
12502 Command not implemented
12503 Bad sequence of commands
12504 Command not implemented for that parameter
12521 [domain] does not accept mail
12530 Not logged in / Access denied
12532 Need account for storing files
12550
Requested action not taken. File unavailable (e.g., file not found, no access) / Mailbox
unavailable
12551 Requested action aborted. Page type unknown / User not local
12552
Requested file action aborted, exceeded storage allocation / Requested mail action aborted,
exceeded storage allocation
12553 Requested action not taken, file name not allowed / mailbox name not allowed
12554 Transcation failed
12560 Invalid Equipment Module number
12561 Equipment Module not enable in the system
12562 Invalid number of enabled Control Modules in selected Equipment Module
12563 Time rollover warning
Axis Error
40960 RESERVED
45332 Sending clear alarms command to servo drive failed.
45335 Failed to initialize absolute encoder.
Operating System Error
57620
The DataType connected to a function block parameter specified as ANY type does not
match the required data size. Right click on the function block and select “Object
Properties” to determine which parameters are ANY type.
Kernel Error
61713
An internal assertion in the motion kernel failed indicating the controller is not in a stable
state. Please report this error to Yaskawa America Incorporated.
Please refer to the following manuals for details regarding servo amplifier errors: