Error description – Yaskawa MotionWorks IEC Toolboxes User Manual
Page 545
Yaskawa Toolbox: Function Blocks
MotionWorks IEC61131-3 Toolboxes: 2013-09-13
532
•
The Explicit_Message function block uses the Y_DeviceComm firmware library. This firmware library
must be added to your project. Y_DeviceComm was incorporated into firmware version 2.1.0 and has
been included as a firmware library starting in MotionWorks IEC v2.1.0.
•
Enter parameters as entered in Message Configuration for the MSG function block in AB RSLogix
software.
•
See Yaskawa's Youtube webinar -
for more info.
Error Description
ErrorID
Meaning
No error
The maximum number of concurrently open user IO devices (sockets/files) has been
reached.
The socket handle was invalid.
The IP address string was not in a valid format.
The socket could not be created.
The specified address or port is already in use on the local network.
The specified address or port is not available for use.
Unable to accept new socket connection.
Unable to bind to the specified address.
The socket type argument was invalid.
The local address or port was not valid.
The socket could not be connected.
There is no network routing path to the specified address.