Yaskawa MotionWorks IEC Toolboxes - Manual (Page 533)

Yaskawa Toolbox: Function Blocks
MotionWorks IEC61131-3 Toolboxes: 2013-09-13 520
V Index INT Indicates the last array index recorded
V DataFilled BOOL
Indicates when the Data recording has reached the
DataSize
B Error BOOL
Set high if error has occurred during the execution of
the function block. This output is cleared when
'Execute' or 'Enable' goes low.
B ErrorID UINT
If Error is true, this output provides the Error ID. This
output is reset when 'Execute' or 'Enable' goes low.
Error Description
ErrorID Meaning
0 No error
10024 DataSize must be greater than zero