Yaskawa MotionWorks IEC Toolboxes - Manual (Page 413)

PLCopen Toolbox: DataTypes
MotionWorks IEC61131-3 Toolboxes: 2013-09-13 400
END_STRUCT;
END_TYPE
NOTES:
INPUT - Indicates a value that the USER must supply to the ProductBuffer function block.
OUTPUT - Indicates a value that the ProductBuffer function block will write to the structure for use in the
application.
The following structure values are not used by the ProductBuffer function block, but are defined in the
ProductBufferStruct because typical applications that cam benefit from this function require this data for
successful operation:
• SensorDistance
• SensorOffset
• ProductAwayDistance