Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 43)

MAESTRO Installation and Service Manual 43
Major Components
4 RU M/C Frame
The 4 RU M/C frame can handle one (1) Maestro board at maximum. The
Maestro board must only be mounted in the bottom slot (Slot 2).
Figure 6. 4 RU M/C Frame
Automation Interface
The Maestro can be controlled by a third-party automation computer that
is connected to the Automation port. The automation computer must send
commands as described in the Maestro automation protocol manual. For
more information, contact Grass Valley Technical Support.
The current Maestro automation protocol manual can be found at
http://www.grassvalley.com/products/mcontrol/maestro/
• Click the Library button at the top of the page and then the Manuals
hyperlink.
8384_17
Controller Modules
Power Supply Modules
Slot 2
Slot 1
Slot 1
Slot 2
Slot 1
Slot 2