Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 395)

MAESTRO — Installation and Service Manual 395
The Configuration Process
Figure 289. The Server is Connected
Defining the Channel Information
You will need to configure the Channel information. The needed informa-
tion is located in the Configuration tab’s area.
Follow these steps to connect to configure the Channel information:
1. Click the Configuration tab, which is located at the top of the right-hand
panel of the application. The Configuration area will then appear.
2. Select the Use Default Folders check box if it is not already selected.
Note When the Use Default Folders check box is selected, the FTP Root Directory,
the Pending Folder, and the Complete Folder will not need to be defined.
Connected Server