Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 290)

290 MAESTRO Installation and Service Manual
Section 7 — Prelude Control System Interface
2. Click the Load Panel Config from File button, which is on the top row of the
Router Configuration Matrix page. The load Panel Configuration
window will then appear.
Figure 180. The Load Panel Configuration Window
3. Select the preferred configuration file from the Panel Configurations
area.
4. Click the Load button ( Figure 180 ). The configuration settings will then
be loaded into the panel.
Modifying the NP Server Configuration
For Maestro to control Concerto by means of Prelude, at least two NP
clients must be set for both the primary and secondary Prelude panel server
panels for redundancy. The Maestro configuration PC is one of the NP pro-
tocol clients. The Maestro configuration PC communicates to the Prelude
panels to retrieve router data for Maestro configuration. Each Maestro
frame processor board is also a client that must be defined for switching the
router.
Follow these steps to modify the NP Server configuration: