Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 362)

362 MAESTRO — Installation and Service Manual
Section 11 — Deploy and Verify Content
Figure 255. Configuration File Selection
3. Click the Update Only button. This step will download the selected
configuration file to all of the components that are defined in the
selected configurations Network Description table. However, this
configuration will not be applied or activated, until the
Apply Pending
button is clicked or Maestro is restarted.
4. Click on one of the Maestro channel processors to select just that
channel. Make sure that only the selected channel is highlighted.
Note Before selecting a channel processor, you may need to first click the Unselect
All button if other Maestro network components are already selected.
5. Click the Apply Pending button to apply the configuration file only to the
selected Maestro channel.
If there are any errors, note these errors and then contact Grass Valley
support for assistance.