Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 138)

138 MAESTRO Installation and Service Manual
Section 5 — The Maestro Configuration Editor
Row Editing
The rows can be added and cleared using the following rules.
Adding a Row
To add a row (or rows) at the bottom of a table:
1. Position the cursor anywhere within the table.
2. Right-click and then select the Add Row(s) option.
To add one row on the bottom of the table:
1. Position the cursor on the bottom of the table.
2. Press the Insert key on your keyboard.
Clearing a Row
To clear a row of user data:
1. Select the blank box on the left end of the row.
2. Right-click and then select the Cut option.
To clear a row of all data:
1. Press the Delete key on your keyboard.
2. Right-click and select the Delete Row(s) option to delete the row
entirely.
Saving
Press the Apply button to save the changes in memory (they are not saved to
disk until you select File > Save). If you attempt to close the Configuration
File before applying your changes, a pop up message will appear asking
you to confirm or abandon the changes before editing a new file.
You can exit without writing even after changes have been Applied and the
table closed by selecting File > Exit and then selecting the No button to the
Save? question.
Fill / Increment
Fill
The Fill option (Edit > Fill) is a copy/paste function for use with tables con-
taining repetitive material. For example, on the Input table you could enter