Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 249)

MAESTRO Installation and Service Manual 249
8th Step: Channel Sets
Channel Delegation
This table defines the set of Maestro channels (Processors) that will be avail-
able on the Channel Control sub panel. The channels are grouped in
“banks” of four channels each. For example, a given frame containing four
channels could be accessed by pressing “Bank 1,” which would cause the
names of those four channels to appear on the four LCD buttons. The oper-
ator would then press an LCD button to take control of (“delegate”) that
channel.
When this item is selected, the editor will open a Set Panel.
The set is assigned to a control panel using the Channel Server table, as
described on
page 252 .
Figure 144. Channel Delegation Table (Example) Figure 145. Channel Control Sub Panel
Delegation Channel Number
Enter a Channel Number for this channel from 1-48. This number identifies
the Channel Bank and one of the four LCD buttons on the Channel Control
sub panel.
In Figure 144 , “Delegation Channel Number 1” identifies Channel Bank 1,
LCD button 1 in Figure 145 .
As another example, Delegation Channel Number “5” would identify
Channel Bank 2, LCD button 1.
Note Buttons may be left unassigned (blank). For example, the channel SD could
be assigned to button number 1 and the channel HD to button number 4. This
would leave buttons 2 and 3 blank with no channel assignment.