Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 270)

270 MAESTRO Installation and Service Manual
Section 6 — Deployment Control Center
Updating the System Configuration and Software
Follow these steps to update the System configuration and software:
1. Launch the Maestro Deployment control center by selecting “Start> All
Programs> Thomson> Maestro Deployment Center.
A Maestro Deployment Control Center window that is similar to the
example shown in
Figure 161 appears.
Figure 161. Maestro Deployment Control Center (example)
2. Select the Show Log button to optionally provide detailed monitoring of
the update process.
3. In the Configuration box:
a. Verify that the Folder field has the correct path to the Maestro
configuration directory. (C:\Thomson is the default location.)
b. Select the Maestro configuration set to be activated in the File: drop
down list.
This information should be the configuration set that is updated and
compiled for v2.4.0 use (See Re-compiling a Prior Version Configuration
File
on page 264 ).