Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 335)

MAESTRO — Installation and Service Manual 335
Channel Branding Hard Drives Installation
Mounting and Formatting Drives
Hard drives installed in the drive cage must be mounted and formatted
before branding content can be copied to the drives. A new drive can be
installed in the frame while the Maestro Processor board is running. There
is no need to remove the board in order to install a drive. Drives received
from Grass Valley have been formatted and tested prior to shipment.
Note If you received the hard drive from Grass Valley, it is already formatted. You
can proceed to the
Installing the Content Gateway section.
Mounting a Drive
Each drive has a push button for mounting the drive as illustrated in
Figure 233 .
Figure 233. Channel Branding Drive Mount Buttons
To mount a drive, push the mount button that is associated with that drive.
If the drive mounts successfully, the mount LED for that drive will be illu-
minated (see
Figure 234 ).