Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 360)

360 MAESTRO — Installation and Service Manual
Section 10 — Channel Branding Configuration
Branding elements are considered “Internal” sources. They are stored on
the DVE hard drive(s) located on the Maestro channel processor board. A
cable connected to a rear panel input is not required to access the source.
When a branding element is added to the Input table, the video and audio
sources are highlighted in green (see
Figure 254 ). The color highlight indi-
cates that they are internal sources.
Note Highlighting of sources in colors that designate the source type is active only
if the “Enable source type color coding” option is selected in the Input table.
See
Figure 254 .
Only the branding elements defined in the Input table will be deployed to
and be available on the channel(s) which utilize a particular Input table.
The presence of the branding element in the Branding Content tables does
not mean that the element is applied to any Maestro channels. The Input
table source definitions make that determination.
Save and compile the configuration with the branding content definition.
Proceed to Section 11-Deploy and Verify Content.