Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 363)

MAESTRO — Installation and Service Manual 363
Verify Branding Element Deployment
Verify Branding Element Deployment
Follow these steps to verify the deployment of branding elements to the
selected Maestro channel:
1. Verify that the branding elements were properly deployed to the
Maestro channel by clicking the
Show Contents button as illustrated in
Figure 256 .
Figure 256. Deployment Center - Show Contents
When the Show Contents button is clicked, the DVE Content window shown
in Figure 257 appears.
Note If a new content definition is included in an applied configuration (depending
on the number of content definitions associated with a channel) it may take a
period of time before the change is detected and the new content is loaded to
the channel hard disk drive. Attempting to load a new content definition
before the content is available on the channel disk drive will result in a failure
to load the desired content. The user may use the Show Contents dialog to
view the available content on the channel disk drive.