Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 229)

MAESTRO Installation and Service Manual 229
7th Step: Effects Configuration
Available Audio Modes
When an effect is active, audio from one or both on-air video sources may
be selected. The audio mode may be selected before entering the effect or
while the effect is active by selecting the Audio Only exit mode.
The available audio modes include the following:
• PGM - Audio from the PGM source only
• AUX - Audio from the AUX source only
• P/A - PGM audio as an over to AUX audio
• A/P - AUX audio as an over to PGM audio
• P+A - PGM and AUX audio both at full level
Only the audio modes selected in the DVE configuration will be available
for selection before entering an effect or as an Audio Only transition while
in the effect. See
Figure 130 for an example.
Figure 130. DVE Audio Mode Selection
Background Source
Click the Background Source’s arrow to open the drop-down list. The Back-
ground Source options will then appear (
Figure 131 ). The options are Key1-
8 fill and Black.