Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 295)

MAESTRO Installation and Service Manual 295
Configuration and Installation Steps
Define the Protocol Type and Redundant IP Address
1. Click the RCS Configuration hyperlink. The RCS Configuration screen will
then appear.
Figure 188. RCS Connection Table
2. Create a name for the controller. This is an arbitrary name that is only
used within the Maestro system.
3. Select the “Native Protocol” option from the Protocol drop-down list
for Encore control.
4. Enter the primary Prelude panel IP address in the IP Address field.
5. Enter the secondary Prelude panel IP address in the Redundant IP
Address field.
6. Select the Apply button (to leave the table open) or the OK button (to close
the table). If there are entry errors (such as blank fields) they will be
indicated at this time.
Maestro can now control Concerto using Prelude panels.