Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 128)

128 MAESTRO Installation and Service Manual
Section 4 — Software Installation
The window shown in Figure 57 will appear when the software installation
is complete.
Figure 57. Maestro Software Package Installation Complete
4. Select the Finish button.
The installation of the Maestro Software Package on the PC is now com-
plete.
Note If the installation fails to complete and you see the error message “Error 1001
-- the specified service already exists,” you may need to manually remove the
Maestro Jupiter Router Service software. Refer to Manually Removing the
Maestro Jupiter Router Service Software
on page 129 .
Proceed to Software Installation on page 123 for information on creating and
compiling Maestro configurations.
Manually Installing Software
The process will need to be started manually if the installation does not
automatically start:
1. Select Start > Run.
A window similar to that shown in Figure 58 should appear.