Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 276)

276 MAESTRO Installation and Service Manual
Section 6 — Deployment Control Center
Updating FPGAs/CPLDs
Follow these steps to update an FPGAs/CPLDs (FPGA = Field Program-
mable Gate Array. CPLD = Complex Programmable Logic Device.)
1. Updating FPGAs/CPLDs on the Processor board(s):
Note Some of the FPGAs on the Processor are updated using the Software Version
Update and Apply procedure described above. The remaining FPGAs on the
Processor are updated using the procedure below.
a. In the board Status section of the Maestro Deployment control
center, select the Processor to update.
b. Right-click on the “Running” FPGA field for this Processor. See
Figure 165 .
Figure 165. “Running” FPGA Version
This step will display the FPGA/CPLD update menu. See Figure 166 .