Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 123)

MAESTRO Installation and Service Manual 123
Section
4
Software Installation
The Maestro Configuration Editor and Deployment Control Center appli-
cations must be installed on the same PC. This PC is commonly referred to
as “The Maestro deployment PC.”
Other applications such as the GUI Control Console may be installed on a
separate PC. If using the Jupiter Router Control System, the Jupiter Router
Service must be installed on the Jupiter server (if using the Jupiter Router
Control System). This PC should not be the same PC that the Maestro Con-
figuration Editor and Deployment Control Center applications are
installed.
Installation Types
The Maestro software must be installed differently depending on the fol-
lowing situations:
• If the Maestro deployment PC was purchased from Grass Valley, the
software may have been installed at the factory.
• If the Maestro software is being upgraded from a previous version,
follow the upgrade instructions in the appropriate Grass Valley Release
Notes. Failure to do so could result in loss of user data or system failure.
For more information, please contact Grass Valley Technical Support
(see
page 2 in this manual).
• If the software is being installed for the first time, follow the procedure
in the Release Notes.
A typical software upgrade procedure is presented in the remainder of this
section. To ensure proper installation of software, always follow the proce-
dure documented in the Release Notes that accompany the associated
version of the Maestro software.