Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 289)

MAESTRO Installation and Service Manual 289
Configuration and Installation Steps
7. Enter a name for the configuration file in the Config Name field (or select
a file that you want to overwrite) and then click the
Save button
( Figure 178 on page 288 ). The window will then close and the matrix
will be visible.
Sending the Router Configuration File to the Control Panel
The modified configuration file will need to be sent to the Control panel.
Follow these steps to send the configuration file to the control panel:
1. Click the Send Router Config to Control Panel button, which is on the top row
of the Router Configuration Matrix page. The Select Panel window will
then open (
Figure 179 ).
Figure 179. The Select Panel Window
2. Select the preferred panels in the Online panels area.
3. Select the Re-boot when complete check box.
4. Click the OK button. A window with a progress bar will then appear.
The config file will then be sent to the control panel.
Load the Panel Configuration File
The panel configuration file will need to be loaded by the panel. Follow
these steps to load the configuration file.
1. Click the tab that has the name of the preferred panel’s information. An
image of the panel will then appear with sections for assigning
functions to the buttons will then appear. In this example, the 48B panel
is used.