Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 281)

MAESTRO Installation and Service Manual 281
Section
7
Prelude Control System
Interface
This section provides the Configuration and Installation steps that are
needed for Maestro to control Prelude matrices such as Concerto, which is
used in the examples in this section.
Minimum Prerequisites:
• The 3.2.1 version of the Prelude software.
• The 2.0.11 version of the NetConfig software.
• The 1.7 version (for Single-Channel DVE users) the Maestro software
• The 2.0 version (for Dual-Channel DVE or no DVE users) of the Maestro
software.
Configuration and Installation Steps
You will need to:
• Configure and update the Prelude matrices.
• Configure and update the Prelude panels.
• Load the Router configuration file in Prelude.
• Load the Panel configuration file in Prelude.
• Configure the RCS Configuration Server and RCS Connections tables in
Maestro.
Configuring and Updating the Prelude Matrices
The Prelude matrices must be configured and updated to the 3.2.1 version
of Prelude software. The Prelude 3.2.1 software comes with the 2.0.11
version of NetConfig, which will be installed by default. The 2.0.11 version
of the NetConfig software should have the Prelude button on the row of