Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 351)

MAESTRO — Installation and Service Manual 351
Section
10
Channel Branding
Configuration
This section describes the process of making Channel branding elements
available for use on Maestro channels. Before proceeding with the configu-
ration and deployment of branding elements, the following (as described
in the preceding sections) must be done:
• The DVE mezzanine board and hard drive(s) must be properly installed
on the Maestro Processor board.
• The Content Gateway must be installed.
• The Branding Elements will be saved in the designated Content
Gateway folders.
Note The location of the content that does not yet exist may be entered in the Con-
figuration Editor.
Content Definition Table
Branding elements to be used in Maestro are defined in the Configuration
Editor Branding Content Definition table as illustrated in
Figure 248 and
Figure 249 .
Note Multiple Content Definition tables may be created in order to accommodate
different video output standards or different content sets for different chan-
nels. Content definitions are not assigned directly to channels; however, they
contain the sources from which branding inputs are made available to a
Maestro channel.