Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 245)

MAESTRO Installation and Service Manual 245
8th Step: Channel Sets
Clean Feed 1
There are five (5) internal tap points that can be selected to be used as the
output on the Clean Feed 1 rear panel BNCs. Select the preferred tap point
from the drop down list. The choices are:
Clean Clean : This option is background Cuts Only, No Video Keys.
Downstream PGM Mixer : This option is background Transitions,
Upstream and Downstream Video Keys including DVE, same as Program
Output.
Downstream PST Mixer : This option is a Look Ahead Preview, same as
Preset output.
Upstream Keys : This option is background Cuts Only including Upstream
Keys.
Upstream Mixer : This option is background Transitions, Upstream Video
Keys including DVE.
Clean Feed 2
There are five (5) internal tap points that can be selected to be used as the
output on the Clean Feed 2 rear panel BNCs. Select the preferred tap point
from the drop down list. The choices are:
Clean Clean : This option is background Cuts Only, No Video Keys.
Downstream PGM Mixer : This option is background Transitions,
Upstream and Downstream Video Keys including DVE, same as Program
Output.
Downstream PST Mixer : This option is a Look Ahead Preview, same as
Preset output.
Upstream Keys : This option is background Cuts Only including Upstream
Keys.
Upstream Mixer : This option is background Transitions, Upstream Video
Keys including DVE.
Background MADI Expansion
If the Sonata AES-to-MADI converter is used to provide audio for back-
ground video buses A, B, C and D, (or if the Apex MADI output is con-
nected to Maestro for Background inputs) set the value in this column to
“Yes.” If Sonata is not used, the value should be “no.”
Note When background MADI is set to ‘Yes”, the rear panel background AES inputs
are deactivated. All background AES input is via the MADI-1 rear panel inter-
face.