Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 333)

MAESTRO — Installation and Service Manual 333
Channel Branding Hard Drives Installation
Figure 231. Drive Assembly Installed in Drive Cage
With the Channel Branding board mounted on the Maestro Processor
board and the disk drive(s) installed:
6. Reinsert the Maestro Processor board into the frame carefully.
7. Verify that the board starts properly with no errors in the Deployment
Center.
As illustrated in Figure 232 , “Started” will appear in the “Status” column if
the board loads with no errors.