Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 318)

318 MAESTRO — Installation and Service Manual
Section 8 — Software Installation
Updating FPGAs/CPLDs
This section will describe the steps needed to update the FPGAs/
CPLDs on the Processor boards and on the hardware control panel.
(FPGA = Field Programmable Gate Array. CPLD = Complex Program-
mable Logic Device.)
Updating FPGAs/CPLDs on the Processor Boards
Note Some of the FPGAs on the Processor are updated using the Software Version
Update and Apply procedure described above. The remaining FPGAs on the
Processor are updated using the procedure below.
Follow these steps to update the FPGAs/CPLDs on the Processor boards:
1. In the board Status section of the Maestro Deployment control center,
select the Processor to update.
2. Right-click on the “Running” FPGA field for this Processor. See
Figure 216 .
Figure 216. “Running” FPGA Version
The FPGA/CPLD update menu will then appear. See Figure 217 .