Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 411)

MAESTRO — Installation and Service Manual 411
Figure 302. The Event Code Definition Table
Follow these steps to assign the Event or Severity code for each TFT event
code:
1. Select the preferred Event Code row.
2. Select the preferred Severity from the Severity Level drop-down list.
For example, Test, Watch, or Warning. User defined levels are allowed.
3. Click the OK button and then the Apply button.
4. Save the changes by selecting Save from the File menu (File > Save).
Note Event codes can be added to this table.
GPIO Definition Table
The GPIO Definition table has been modified to accommodate additional
Sub systems for the EAS messaging option; the new GPIO Sub systems are
EAS Messaging Warning, EAS Messaging Watch, EAS Messaging Test and
EAS Messaging User1 thru EAS Messaging User12.
The GPIO Definition hyperlink can be found in the 5th Step: Input/Output
Sets area. The GPIO Definition table will appear after clicking this hyper-
link.