Grass Valley Maestro Master Control Installation v.2.4.0 - Manual (Page 265)

MAESTRO Installation and Service Manual 265
Function Buttons
Function Buttons
All function button operations apply to the selected board(s) from the
board list. By clicking on the row, you toggle between selecting and de-
selecting the board. There is a button located below the list, which allows
the user to select/de-select all boards.
Reboot : Press this button to reboot the board.
Telnet : Press this button to telnet to the board; a telnet window will be
opened.
Update : Press this button to download files to the board. The user can
specify file types for update:
• Software: The tar file will contain FPGA, VxWorks and Application files.
If this is checked, the software tar file residing in the deployment folder
on the deployment PC will be downloaded to the board and installed
in a pending state;
• Configuration: If this is checked, the board configuration compiled from
the current configuration located in the deployment folder on the
deployment PC will be downloaded to the board in a pending state.
Activate Pending : Press this button to activate pending files including soft-
ware and configuration. The control center will communicate with the state
machine which is running on each board and will bring the board to the
state which allows this operation to take effect.
Clear NVRAM : Pressing the ClearNVRam button will interrupt, and
potentially change, the audio and video signals being processed by the
Maestro channels in the system.
Modification of certain configuration tables requires pressing the Clear
NVRAM button. This requirement applies to the following tables:
• RCS Configuration Server table
• Level table
• Audio Output table
• Audio Input table
• Input table
• Interconnection table
• Background Buttons
• Key Fill Association table
• Wipe Transitions table (only if a wipe is active)
• DVE Configuration table (only if a DVE effect is active)
• Channel Setup table