Adobe Dreamweaver CC 2015 - Manual (Page 148)

141
Layout and design
Last updated 6/3/2015
Create frames and framesets
There are two ways to create a frameset in Dreamweaver: You can select from several predefined framesets or you can
design it yourself.
Choosing a predefined frameset sets up all the framesets and frames needed to create the layout and is the easiest way
to create a frames-based layout quickly. You can insert a predefined frameset only in the Document window’s Design
view.
You can also design your own frameset in Dreamweaver by adding “splitters” to the Document window.
Before creating a frameset or working with frames, make the frame borders visible in the Document window’s Design
view by selecting View >Visual Aids > Frame Borders.
Create a predefined frameset and display an existing document in a frame
1 Place the insertion point in a document and do one of the following:
• Choose Insert > HTML > Frames and select a predefined frameset.
• In the Layout category of the Insert panel, click the drop-down arrow on the Frames button and select a
predefined frameset.
The frameset icons provide a visual representation of each frameset as applied to the current document. The blue
area of a frameset icon represents the current document, and the white areas represent frames that will display
other documents.
2 If you have set up Dreamweaver to prompt you for frame accessibility attributes, select a frame from the pop-up
menu, enter a name for the frame, and click OK. (For visitors who use screen readers, the screen reader will read
this name when it encounters the frame in a page.)
Note: If you click OK without entering a new name, Dreamweaver gives the frame a name that corresponds to its
position (left frame, right frame, and so on) in the frameset.
Note: If you press Cancel, the frameset appears in the document, but Dreamweaver does not associate accessibility tags
or attributes with it.
Select Window > Frames to view a diagram of the frames you are naming.
Create an empty predefined frameset
1 Select File > New.
2 In the New Document dialog box, select the Page from Sample category.
3 Select the Frameset folder in the Sample Folder column.
4 Select a frameset from the Sample Page column and click Create.
5 If you have activated the frame accessibility attributes in Preferences, the Frame Tag Accessibility Attributes dialog
box appears; complete the dialog box for each frame and click OK.
Note: If you press Cancel, the frameset appears in the document, but Dreamweaver does not associate accessibility tags
or attributes with it.
Create a frameset
❖ Select Modify > Frameset, then select a splitting item (such as Split Frame Left or Split Frame Right) from the
submenu.
Dreamweaver splits the window into frames. If you had an existing document open, it appears in one of the frames.