Apple Aperture 3.5 - Manual (Page 140)

Chapter 4 Organize and sort photos 140
A dialog also appears at the bottom of Places view, informing you that you can move the pin to
change the location assigned to all photos associated with the pin.
Selected photo
A red pin with a location label
marks the location where the
photo selection was shot.
5 Click Done.
The pin indicates that the location you specified has been assigned to the selected photos, and a
location badge (a red pin) appears over the thumbnail images in the Browser.
Location badge
Search for a location and assign it to a photo selection
1 Select an item in the Library inspector containing photos to which you want to assign
location information.
2 If the main window is not in Places view, click the Places button in the toolbar.
The Aperture main window switches to Places view. Red pins mark the locations where photos
that already have location information were shot.
3 In the Browser, select the photos to which you want to assign a location.
67% resize factor