Parameters, Document revision history, Parameters -3 – Altera Embedded Peripherals IP User Manual
Page 184: Document revision history -3

When the transaction is complete, the bridges send a response to the host system using the same protocol.
Parameters
For the SPI Slave to Avalon Master Bridge core, the parameter Number of synchronizer stages: Depth
allows you to specify the length of synchronization register chains. These register chains are used when a
metastable event is likely to occur and the length specified determines the meantime before failure. The
register chain length, however, affects the latency of the core.
For more information on metastability in Altera devices, refer to
For more information on metastability analysis and synchronization register chains, refer to the
Document Revision History
Table 18-1: Document Revision History
Date and
Document Version
Changes Made
Summary of Changes
July 2014
v14.0.0
-Removed mention of SOPC Builder, updated to
Qsys
Maintenance Release
December 2010
v10.1.0
Removed the “Device Support”, “Instantiating the
Core in SOPC Builder”, and “Referenced
Documents” sections.
—
July 2010
v10.0.0
No change from previous release.
—
November 2009
v9.1.0
No change from previous release.
—
March 2009
v9.0.0
Added description of a new parameter Number of
synchronizer stages: Depth.
—
November 2008
v8.1.0
Changed to 8-1/2 x 11 page size. No change to
content.
—
May 2008
v8.0.0
Initial release.
—
UG-01085
2014.24.07
Parameters
18-3
SPI Slave/JTAG to Avalon Master Bridge Cores
Altera Corporation