Rockwell Automation 21G PowerFlex 750-Series AC Drives Programming Manual User Manual
Page 239

Rockwell Automation Publication 750-PM001J-EN-P - October 2014
239
Embedded Feature and Option Module Parameters
Chapter 5
Embe
dded EtherN
et/IP
81
82
83
84
Fr Peer Addr 1
Fr Peer Addr 2
Fr Peer Addr 3
Fr Peer Addr 4
From Peer Address 1…4
Sets the bytes in the IP address that specifies the device from which the adapter receives
(consumes) Peer I/O data.
Important: The Peer Inp Addr must be on the same subnet as the embedded EtherNet/
IP adapter.
Changes to these parameters are ignored when P85 [Fr Peer Enable] is “1” (On).
For detailed information on peer communications, refer to the PowerFlex 755 Drive
Embedded EtherNet/IP Adapter User Manual, publication 750COM-UM001.
Default:
Min/Max:
0
0 / 255
RW 32-bit
Integer
85
Fr Peer Enable
From Peer Enable
Controls whether Peer I/O input is operating. A value of 0 “Off” turns off Peer I/O input. A
value of 1 “Cmd/Ref” overrides the settings in Parameters P76 [DLs Fr Peer Cfg], P78
[Logic Src Cfg], and P79 [Ref Src Cfg] and automatically uses peer Datalink 01 as the
drive's present Logic Command and peer Datalink 02 as the drive’s Reference. A value of
2 “Custom” enables peer I/O input using the Datalink count and settings provided by the
user.
For detailed information on peer communications, refer to the PowerFlex 755 Drive
Embedded EtherNet/IP Adapter User Manual, publication 750COM-UM001.
Default:
Options:
0 = “Off”
0 = “Off”
1 = “Cmd/Ref”
2 = “Custom”
RW 32-bit
Integer
86
Fr Peer Status
From Peer Status
Displays the status of the consumed Peer I/O input connection.
For detailed information on peer communications, refer to the PowerFlex 755 Drive
Embedded EtherNet/IP Adapter User Manual, publication 750COM-UM001.
Default:
Options:
0 = “Off”
0 = “Off”
1 = “Waiting”
2 = “Running”
3 = “Faulted”
RO
32-bit
Integer
87
DLs To Peer Cfg
Datalinks To Peer Configure
Sets the number of drive-to-network Datalinks (parameters) that are used for Peer I/O.
The Datalinks being used are allocated from the end of the list. For example, if this
parameter's value is set to 3, Datalinks 14…16 are allocated for the three selected
Datalinks. The Datalinks allocated for this cannot overlap with other assigned DL To Net
01…16 parameters.
For detailed information on peer communications, refer to the PowerFlex 755 Drive
Embedded EtherNet/IP Adapter User Manual, publication 750COM-UM001.
Default:
Min/Max:
0
0 / 16
RW 32-bit
Integer
88
DLs To Peer Act
Datalinks To Peer Action
Displays the value of P87 [DLs To Peer Cfg] at the time the drive was reset. This is the
number of actual drive-to-peer Datalinks that the drive is expecting.
Default:
Min/Max:
0
0 / 16
RO
32-bit
Integer
Fi
le
Grou
p
No.
Display Name
Full Name
Description
Values
Re
ad
-W
ri
te
Da
ta
T
ype
755
755
755
755
255 . 255 . 255 . 255
[Peer Inp Addr 1]
[Peer Inp Addr 2]
[Peer Inp Addr 3]
[Peer Inp Addr 4]
755
755
755
755