Rockwell Automation 21G PowerFlex 750-Series AC Drives Programming Manual - Manual (Page 161)

Rockwell Automation Publication 750-PM001J-EN-P - October 2014 161
Drive Port 0 Parameters Chapter 3
DI
AG
N
O
STICS
Sta
tus
940 Drive OL Count
Drive Overload Count
Indicates power unit overload (IT) in percentage. When the value reaches 100%, the
power unit overload fault occurs. Units:
Default:
Min/Max: %
0.00
0.00 / 200.00 RO Real
941 IGBT Temp Pct
Insulated-Gate Bipolar Transistor Temperature Percent
Indicates IGBT junction temperature in percentage of the maximum junction
temperature. Units:
Default:
Min/Max: %
0.00
–/+200.00 RO Real
942 IGBT Temp C
Insulated-Gate Bipolar Transistor Temperature Celsius
Indicates IGBT junction temperature in centigrade. Units:
Default:
Min/Max: DegC
0.00
–/+200.00 RO Real
943 Drive Temp Pct
Drive Temperature Percent
Indicates operating temperature of the drive power section (heat-sink) in percentage of
the maximum heat-sink temperature. Units:
Default:
Min/Max: %
0.00
–/+200.00 RO Real
944 Drive Temp C
Drive Temperature Celsius
Present operating temperature of the drive power section. Units:
Default:
Min/Max: DegC
0.00
–/+200.00 RO Real
Fi
le
Grou
p
No. Display Name
Full Name
Description Values
Re
ad
-W
ri
te
Da
ta
T
ype