Lenze 8400 StateLine - Manual (Page 819)

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
819
15 Parameter reference
15.2 Parameter list | C02582
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Bit 2  with hoist inv. feedfwd. control Direction of feedforward control with vertical/hoist
technology:
• 0 ≡ Positive direction
• 1 ≡ Negative direction
Note:
Reversal (Ccw) is then considered.
Bit 3  Horizontal application Direction of movement of the axis
• 0 ≡ The axis performs vertical movements.
Gravitational acceleration causes movements.
• 1 ≡ The direction of the axis is horizontal or rotary. The
gravitational acceleration does not cause any
movement.
Bit 4  Feedforward control C2581 From version 11.00.00
Selection of the feedforward control value
• 0 ≡ Automatic selection.
• The torque saved at the last stop is used.
• 1 ≡ Manual selection.
• bMBrakeStartValue2 = FALSE: The feedforward
control value 1 set in C02581/4 is used.
• bMBrakeStartValue2 = TRUE: The feedforward
control value set in C02581/5 is used.
Bit 5  Feedback monitoring From version 11.00.00
Activation of status monitoring
• 1 ≡ The bMBrakeApplied input for status detection of
the brake (via a switching contact at the brake) is
monitored after the waiting time set in C02589/3 has
expired.
Bit 6  SyncRampe L_NSet_1 From version 11.00.00
Selection of the ramp time for the synchronisation
process to setpoint speed after the brake opening time
has elapsed
Revised behaviour from version 11.00.00:
• 1 ≡ The ramp time of the effective acceleration of the
ramp function generator ( L_NSet_1 ) is used (Lenze
setting).
• 0 ≡ As before, the ramp time set in C02610/1 is used.
Note:
The changeover can be dynamically both via the ramp
parameter and via bit 6.
Bit 7  Reserved
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT
Parameter | Name:
C02582 | Holding brake: Setting
Data type: UNSIGNED_8
Index: 21993
d
= 55E9
h