Lenze 8400 StateLine - Manual (Page 713)

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
713
15 Parameter reference
15.2 Parameter list | C00606
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00606
C00607
C00608
C00609
C00610
Parameter | Name:
C00606 | Resp. to motor overload (I²xt)
Data type: UNSIGNED_8
Index: 23969
d
= 5DA1
h
Response when the motor load displayed in C00066 reaches the value "100.00 %".
 Motor overload monitoring (I2xt)
Selection list (Lenze setting printed in bold)
0 No Reaction
1 Fault
5 Warning
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00607 | Resp. to max freq. feedb. DIG12/67
Data type: UNSIGNED_8
Index: 23968
d
= 5DA0
h
Response when the maximum input frequency has been reached via the digital inputs.
Selection list
(Lenze setting printed in bold)
0 No Reaction
1 Fault
5 Warning
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00608 | Resp. to maximum torque
Data type: UNSIGNED_8
Index: 23967
d
= 5D9F
h
Response if the maximum torque ( C00057 ) is reached.
Selection list (Lenze setting printed in bold)
0 No Reaction
1 Fault
5 Warning
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00609 | Resp. to maximum current
Data type: UNSIGNED_8
Index: 23966
d
= 5D9E
h
Response if the maximum current ( C00022 , C00023 ) is reached.
Selection list (Lenze setting printed in bold)
0 No Reaction
1 Fault
5 Warning
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00610 | 16-bit connection table
Data type: UNSIGNED_16
Index: 23965
d
= 5D9D
h
This code is for device-internal use only and must not be written to by the user!