Lenze 8400 StateLine - Manual (Page 674)

15 Parameter reference
15.2 Parameter list | C00370
674
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00370
C00371
C00372
C00381
Parameter | Name:
C00370 | SyncTxRxTimes
Data type: INTEGER_16
Index: 24205
d
= 5E8D
h
From version 04.00.00
 "CAN on board" system bus
Display range (min. value | unit | max. value)
-1638 μs 1638
Subcodes Info
C00370/1 CAN Sync instant of transmission
C00370/2 Sync instant of reception
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00371 | CAN ErrorCode
Data type: UNSIGNED_16
Index: 24204
d
= 5E8C
h
From version 13.00.00
 "CAN on board" system bus
Display range (min. value | unit | max. value)
0 65535
Subcodes Info
C00371/1 CAN ErrorCode
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00372 | CAN_Tx_Rx_Error
Data type: UNSIGNED_8
Index: 24203
d
= 5E8B
h
 System bus "CAN on board"
Display range (min. value | unit | max. value)
0 255
Subcodes Info
C00372/1 CAN Tx_Error
C00372/2 CAN Rx_Error
C00372/3 CAN Tx_Overflow
C00372/4 CAN Rx_Overflow
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00381 | CAN Heartbeat producer time
Data type: UNSIGNED_16
Index: 24194
d
= 5E82
h
Time interval for the transmission of the heartbeat telegram to the consumer(s).
• The heartbeat telegram is sent automatically as soon as a time > 0 ms is set.
• Mapping of the CANopen object I-1017 (see DS301 V4.02).
 Heartbeat protocol
Setting range (min. value | unit | max. value) Lenze setting
0 ms 65535 0 ms
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1