1 about this documentation, 1 document history, About this documentation – Lenze 8400 StateLine User Manual
Page 15: Document history, 1about this documentation, Danger
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
15
1
About this documentation
1.1
Document history
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1
About this documentation
Target group
This documentation addresses to all persons who would like to parameterise, configure and
diagnose the 8400 StateLine with the Lenze engineering software »Engineer« and the X400 keypad.
Validity
The information in this documentation are valid for the following standard devices:
Screenshots/application examples
All screenshots provided in this documentation are application examples. Depending on the
software version of the controller and the version of the installed »Engineer« software, the
screenshots in this documentation may differ from the representation in the »Engineer«.
Tip!
Information and tools for Lenze products are provided in the download area at
Download
1.1
Document history
Danger!
The controller is a source of danger which may lead to death or severe injury of persons.
To protect yourself and others against these dangers, observe the safety instructions
before switching on the controller.
Please read the safety instructions provided in the 8400 mounting instructions and in
the 8400 hardware manual. Both documents are supplied with the controller.
Product series
Type designation
from software version
8400 StateLine C
E84AVSCxxxxx
01.00
Version
Description
12.0
06/2014
TD05
Extended by new functions for 8400 StateLine C V15.00.00
11.0
11/2013
TD05
Extended by new functions for 8400 StateLine C V14.00.00
10.0
11/2012
TD05
Extended by new functions for 8400 StateLine C V13.00.00 and converted to
new layout.
9.1
09/2012
TD05
Error corrections & supplements
9.0
08/2012
TD05
Extended by new functions for 8400 StateLine C V12.00.00
8.0
10/2011
TD05
Extended by new functions for 8400 StateLine C V11.00.00
7.1
02/2011
TD05
Error corrections & supplements
7.0
11/2010
TD05
Extended by new functions for 8400 StateLine C V06.00.00 and V10.00.00