Lenze 8400 StateLine - Manual (Page 292)

6 I/O terminals
6.4 User-defined terminal assignment
292
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Configuration parameters for the inputs of the technology application
The following parameters can be used to change the preconfigured assignment of the application
inputs:
Example
Task: Starting from the preset technology application "Actuating drive speed" and the "Terminals 0"
control mode, the DI2 digital input is to be used for choosing an alternative
acceleration/deceleration time for the main setpoint instead of for choosing the fixed setpoint 2/3.
To do this, the DI2 digital input is not to be linked to the bJogSpeed2 input but to the bJogRamp1
input of the application module.
Procedure:
1. Use the keypad to go to the menu level Applications  Actuating drive speed (conf.). This menu
level contains all the configuration parameters of the "Actuating drive speed" technology
application".

Configuration parameters ( 322)
2. Navigate to the configuration parameter LA_NCtrl: bJogSpeed2 ( C00701/10 ) which represents
the logical signal link of the application input bJogSpeed2.
3. Change the setting of C00701/10 :
Change selection "16001: DigIn_bIn2" in selection "0: Not interconnected".
4. Navigate to the configuration parameter LA_NCtrl: bJogRamp1 ( C00701/13 ) which represents
the logical signal link of the application input bJogRamp1.
5. Change the setting of C00701/13 :
Change selection "0: Not interconnected" in selection "16001: DigIn_bIn2".

Tip!
The example shows that, for each input of the application block, the associated
configuration parameter ( C00700/x or C00701/x ) is only allowed to contain one source
that you enter.
Parameter Info
TA "Actuating drive speed": Configuration parameters ( 322)
C00700/1...20 Analog connection list
C00701/1...48 Digital connection list
TA "Switch-off positioning": Configuration parameters ( 382)
C00760/1...16 Analog connection list
C00761/1...47 Digital connection list