Lenze 8400 StateLine - Manual (Page 296)

7 Technology applications
296
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7 Technology applications
This chapter describes the handling and the functional range of the technology applications
available for the 8400 StateLine controller.
Related topics:
 Integrated technology applications ( 22)
 Commissioning of the "Actuating drive speed" technology application ( 51)
 Commissioning of the "Switch-off positioning" technology application ( 59)
Technology application "Actuating drive speed"
This technology application preset in
C00005 serves to solve speed-controlled drive
tasks, e.g. conveyor drives (interconnected), extruders, test benches, vibrators,
travelling drives, presses, machine tools, dosing systems.
 TA "Actuating drive speed" ( 298)
technology application "Actuating drive speed (AC Drive Profile)"
This technology application available
from version 13.00.00 provides a speed and
torque control by means of "AC Drive Profile". The fieldbuses EtherNet/IP™ and
system bus (CANopen) are supported.
 TA "actuating drive speed (AC Drive Profile)" ( 325)
"Switch-off positioning" technology application
This technology application available
from version 04.00.00 is used to solve speed-
controlled drive tasks which require a pre-switch off or stopping at certain positions,
e.g. roller conveyors and conveying belts. The pre-switch off is implemented by
connecting switch-off sensors.
 TA "Switch-off positioning" ( 358)

Note!
Please note that the "StateLine", "HighLine" and "TopLine" device types differ with regard
to the number, functional range, and flexibility of the technology applications offered.