22 ls_seterror_1, 23 ls_syncmanagement, 24 ls_writeparamlist – Lenze 8400 StateLine User Manual
Page 1010: 22 ls_seterror_1 0, 23 ls_syncmanagement 0, 24 ls_writeparamlist 0, 17 function library
17
Function library
17.2
System blocks
1010
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameter
17.2.22
LS_SetError_1
Parameterisable responses to user-defined events are tripped.
17.2.23
LS_SyncManagement
Output of status information for synchronising the internal time base.
17.2.24
LS_WriteParamList
Writing to a configurable list which contains up to 32 local parameters.
Note!
The real length of the low or high level at the bSquareWave output is always 1 ms higher
than set in
or
. If "0 ms" is set, a level with a length of 1 ms is created
length, for instance, and if "1000 ms" is set, a level with a length of 1001 ms is created.
Parameter
Possible settings
Info
0
ms
60000 Length of the low level (break) + 1 ms
• For output bSquareWave
• Lenze setting: 1000 ms
0
ms
60000 Length of the high level + 1 ms
• For output bSquareWave
• Lenze setting: 1000 ms
(from version 06.00.00)
0
ms
60000 Delay of the status bFirstCycleDone
• Lenze setting: 100 ms
For a detailed description see the main chapter "Diagnostics & error management":
For a detailed description see main chapter "Synchronisation of the internal time base of
the controller":
Internal interfaces | System block "LS_SyncManagement"
For a detailed description see the main chapterl "