Lenze 8400 StateLine - Manual (Page 272)

6 I/O terminals
6.1 Digital terminals
272
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Counting behaviour
The following temporal characteristic shows the counting process depending on the signals of the
interfaces described before:
[6-1] Transient characteristic of a quick counter block, sampling cycle = 1 ms
• The counter starts with the parameterised starting value.
• If the comparison value is reached or exceeded:
• The counter jumps back to its starting value.
• The bCount1_Compare output is set to TRUE.
• If there is a FALSE/TRUE edge at the bCountIn1_ResetCompare input, the bCountIn1_Compare
output can be reset to FALSE.
• If there is a FALSE-TRUE edge at the input bCountIn1_LoadStartValue, the current counter
content can be reset to the parameterised starting value.
Related topics:
 Using DI1 and DI2 as digital inputs ( 265)
 Using DI1 and DI2 as frequency inputs ( 266)
 Internal interfaces | System block "LS_DigitalInput" ( 273)
E&RXQW,QB5HVHW&RPSDUH
W
E&RXQW,QB/RDG6WDUW9DOXH
W
E&RXQW,QB&RPSDUH
W
W
&
&
&
&RXQWSXOVH
6DPSOLQJF\FOH
&RXQWHUYDOXH
6WDUWYDOXH
&RPSDUHYDOXH