Lenze 8400 StateLine - Manual (Page 613)

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
613
15 Parameter reference
15.2 Parameter list | C00055
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00055
C00056
C00057
C00058
Parameter | Name:
C00055 | Actual values
Data type: INTEGER_16
Index: 24520
d
= 5FC8
h
Note:
When a single-track feedback has been selected for the HTL encoder ( C00115 = 1 or 3), the sign of the actual speed
value is created from the sign of the speed setpoint. In C00055/1, a positive speed is always displayed.
Display range
(min. value | unit | max. value)
-32767 rpm 32767
Subcodes Info
C00055/1 Actual value - HTL encoder FreqIn12
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00056 | Torque
Data type: INTEGER_32
Index: 24519
d
= 5FC7
h
Display of the current torque
Display range
(min. value | unit | max. value)
-65000.00 Nm 65000.00
Subcodes Info
C00056/1 Torque demand
• Only in case of sensorless vector control ( SLVC ).
C00056/2 Actual torque value
• Estimated actual torque for all motor control modes.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00057 | Maximum torque
Data type: UNSIGNED_32
Index: 24518
d
= 5FC6
h
Display of the maximum torque to be generated by the motor
• The maximum torque to be generated by the motor depends on various factors, e.g. on Imax in motor mode
( C00022 ) and the motor type used.
Display range (min. value | unit | max. value)
0.00 Nm 65000.00
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00058 | Output frequency
Data type: INTEGER_32
Index: 24517
d
= 5FC5
h
Display of the current output frequency
Display range
(min. value | unit | max. value)
-1300.00 Hz 1300.00
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100