Lenze 8400 StateLine - Manual (Page 120)

5 Motor control (MCTRL)
5.2 Selecting the control mode
120
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Sensorless vector control (SLVC)
Sensorless (field-oriented) vector control for asynchronous motors is based on a decoupled,
separate control for the torque-producing and the field-producing current component. In addition,
the actual speed is reconstructed by means of a motor model so that a speed sensor is not required.
In comparison to the V/f characteristic control without feedback, the following can be achieved by
means of sensorless vector control SLVC:
• A higher maximum torque throughout the entire speed range
• A higher speed accuracy
• A higher concentricity factor
• A higher level of efficiency
• The implementation of torque-actuated operation with speed limitation
• The limitation of the maximum torque in motor and generator mode for speed-actuated
operation

Tip!
If a high torque without feedback is to be provided at small speeds, we recommend the
"Sensorless vector control" motor control mode.
 Sensorless vector control (SLVC) ( 161)
Sensorless control for synchronous motors (SLPSM)
From version 10.00.00
This sensorless control enables an encoderless control of synchronous motors. The process is based
on field-oriented control within a higher speed range (e.g. > 10 % of the rated motor speed). The
actual speed value and rotor position are reconstructed via a motor model.
Standard applications for this control type are pumps and fans, horizontal materials handling and
simple positioning technology.
 Sensorless control for synchronous motors (SLPSM) ( 177)