Lenze 8400 StateLine - Manual (Page 786)

15 Parameter reference
15.2 Parameter list | C01353
786
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01353
C01501
C01751
C01752
C01755
Parameter | Name:
C01353 | ACDrive: Setpoint scaling
Data type: INTEGER_8
Index: 23222
d
= 5AB6
h
From version 13.00.00
 Actuating drive speed (AC Drive Profil): Scaling of the speed and torque values
Setting range (min. value | unit | max. value)
-128 127
Subcodes Lenze setting Info
C01353/1 0 ACDrive: Speed scaling
C01353/2 0 ACDrive: Torque scaling
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01501 | Resp. to communication error with MCI
Data type: UNSIGNED_8
Index: 23074
d
= 5A22
h
Configuration of monitoring functions for the communication module
Selection list
0 No Reaction
1 Fault
2 Trouble
3 TroubleQuickStop
4 WarningLocked
5 Warning
6 Information
Subcodes Lenze setting Info
C01501/1 0: No Reaction Resp. to MCI connection error
• Response to a communication error of the attached
communication module.
C01501/2 0: No Reaction Resp. to MCI invalid module
• Response to an unplugged or incompatible
communication module
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01751 | Service code inverter characteristic
Data type: UNSIGNED_8
Index: 22824
d
= 5928
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01752 | Service par. inverter charact. function
Data type: UNSIGNED_8
Index: 22823
d
= 5927
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01755 | Service par. inverter charact. factor
Data type: INTEGER_16
Index: 22820
d
= 5924
h
This code is for device-internal use only and must not be written to by the user!