Lenze 8400 StateLine - Manual (Page 678)

15 Parameter reference
15.2 Parameter list | C00409
678
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00409
C00410
Parameter | Name:
C00409 | LP_CanIn Mapping
Data type: UNSIGNED_16
Index: 24166
d
= 5E66
h
From version 03.00.00
Mapping for port blocks LP_CanIn1...4
• These settings are ORed with the mapping settings for the double words in C00407/x .
 CAN port block
Setting range (min. value | unit | max. value)
0 65535
Subcodes Lenze setting Info
C00409/1 0 LP_CanIn1 :wCtrl MapVal
C00409/2 0 LP_CanIn1 :wIn2 MapVal
C00409/3 0 LP_CanIn1 :wIn3 MapVal
C00409/4 0 LP_CanIn1 :wIn4 MapVal
C00409/5 0 LP_CanIn2 :wIn1 MapVal
C00409/6 0 LP_CanIn2 :wIn2 MapVal
C00409/7 0 LP_CanIn2 :wIn3 MapVal
C00409/8 0 LP_CanIn2 :wIn4 MapVal
C00409/9 0 LP_CanIn3 :wIn1MapVal
C00409/10 0 LP_CanIn3 :wIn2 MapVal
C00409/11 0 LP_CanIn3 :wIn3 MapVal
C00409/12 0 LP_CanIn3 :wIn4 MapVal
C00409/13 0 LP_CanIn4 :wIn1 MapVal
• From version 15.00.00
C00409/14 0 LP_CanIn4 :wIn2 MapVal
• From version 15.00.00
C00409/15 0 LP_CanIn4 :wIn3 MapVal
• From version 15.00.00
C00409/16 0 LP_CanIn4 :wIn4 MapVal
• From version 15.00.00
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00410 | L_SignalMonitor_a: Signal sources
Data type: UNSIGNED_16
Index: 24165
d
= 5E65
h
The L_SignalMonitor_a FB: Selection of the signal sources
Selection list
See
selection list - analog signals
Subcodes Lenze setting Info
C00410/1 0: Not connected Signal source for output nOut1_a
C00410/2 0: Not connected Signal source for output nOut2_a
C00410/3 0: Not connected Signal source for output nOut3_a
C00410/4 0: Not connected Signal source for output nOut4_a
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1