Allied Telesis AT-UWC Series - Manual (Page 99)

Chapter 2: System
99
3. Click Submit.
Probes per Hop Specifies the number of probe packets per hop.
The default setting is 3 packets.
Max TTL Specifies the maximum number of hops to allow
probe packets to travel. Time to live (TTL) is
specified by hop counts. The default setting is 30
hops.
InitTTL Specifies the number set in the initial TTL. The
default setting is 1.
MaxFail Specifies the number of attempts to send a probe
packet. The default setting is 5 times.
Interval(secs) Specifies the time period in seconds to wait before
sending another packet. The default value is 3
seconds.
Port Specifies the UDP port number used for probe
packets. The default port number is 33434.
Size Specifies the size of a probe packet in bytes.
TraceRoute Displays the results of executing the TraceRoute
utility.
Table 22. TraceRoute (Continued)
Field Description