Allied Telesis AT-UWC Series - Manual (Page 214)

AT-UWC WLAN Controller Web GUI User’s Guide
214
5. If you want to refresh the display, click Refresh.
Table 76. Access Point Software Download after Start
Field Description
Status Displays the progress of upgrading the software to
access points. The options are:
 Not Started - The WLAN Controller has not
started downloading the software.
 Requested - The WLAN Controller
requested access points to download
software.
 Code Transfer in Progress - Downloading
is in progress.
 Failure - Downloading failed.
 Aborted - Downloading was aborted before
the access point downloads software from
the TFTP server.
 NVRAM-Update-In-Progress -
Downloading was successful. The WLAN
Controller sent the “reset” command.
 Success - Downloading was successful. All
the access points are connected to the
WLAN Controller.
Download Count Displays the number of access points that
downloaded software.
Success Count Displays the number of access points that have the
success status.
Failure Count Displays the number of access points that have the
failure status.
Abort Count Displays the number of access points that have the
abort status.