Allied Telesis AT-UWC Series - Manual (Page 365)

Chapter 5: Wireless LAN
365
Figure 175. WDS AP Configuration Page 2
4. Select the MAC address of the AP to add from the Valid AP MAC
Address select list.
5. Click Submit.
Deleting AP
Members
To delete access point members from the list, do the following:
1. From the Navigation pane, go to WLAN > WDS Configuration > AP
Configuration.
The WDS AP Configuration page is displayed as shown in Figure 174
on page 364.
2. Select a WDS group ID to view its access point members from the
select list.
A list of MAC addresses of the access points that belong to the
selected WDS group is displayed.
3. Check the checkbox of the MAC address for the access point to delete.
4. Click Delete.
5. If you want to refresh the displays on this page, click Refresh.