Allied Telesis AT-UWC Series - Manual (Page 150)

AT-UWC WLAN Controller Web GUI User’s Guide
150
10. Click the following buttons as needed:
 Preview — Displays the web page with the current settings.
 Clear — Reset to the default settings.
 Submit — Makes the changes effective and saves them to the
running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
Account Title Specify the text to prompt the user to authenticate.
User Label Specify the text to be displayed next to the user name
text box.
Password Label Specify the text to be displayed next to the password
text box.
Button Label Specify the text to be displayed on the button to
connect to the network.
Acceptance Use
Policy Text Box Specify the text to be displayed for the Acceptance
Use Policy that shows the user the acceptance
conditions to connect to the network.
Acceptance
Checkbox Title Specify the text to be displayed next to the checkbox
for the user to accept the Acceptance Use Policy.
Instructional Text Specify the text for authentication instructions.
Denied Message Specify the text to be displayed when the user does
not meet acceptance conditions.
Resource
Message Specify the text to be displayed when the
authentication failed due to the lack of system
resource.
Timeout Message Specify the text to be displayed when the
authentication failed because the transaction
exceeded the time limit.
Busy Message Specify the text to be displayed when the
authentication is in process.
No Accept
Message Specify the text to be displayed when the user did not
check the Acceptance checkbox.
Table 42. CP Web Customization (Authentication Page) (Continued)
Field Description